For Mercedes Vito Viano 2 W639 V639 Steering Wheel Radio Adapter

  

For Mercedes Vito Viano 2 W639 V639 Steering Wheel Radio Adapter. This product sheet has been automatically translated. If you have any questions, please feel free to contact us. Important note for customers outside the EU! The buyer is responsible for this responsible for the fees.

Please specify this when placing your order absolutely! Brand of the radio you want to install! We ask for your understanding. With ISO plugs on the car side. And ISO plugs on the radio side. If you have a factory audio system (Separate factory amplifiers) have it via fiber optic cables. Is controlled by the factory radio, this will not be supported and there is no audio output to the car speakers. In this case, you need an additional fiber optic adapter from us. Only for vehicles with interior CAN bus and with 10-pin ISO connector in the upper row of the ISO slot. And the following factory radios: -Audio 5 -Audio 10 -Audio 30 -APS (D2B) - control (for SL R230 with Command only if the plugs fit, which is usually only the case for foreign re-imports) 3.

On some vehicles, the ISO connectors are intended Power and speakers not individual, but firmly connected. You must use the ISO connector in the vehicle with a small Saw or separate cutting pliers around the adapter to connect. The plugs are still in place the original radio can be reconnected. Mounting for the following vehicles.

Vehicle model: Year of construction. Class B (W245/T245) 06/2005 - 06/2011 - Class C (W203) 01/2000 - 01/2005 - Class CLK (C208/A208) 07/1999 - 05/2003 - Class E (W210/S210) 06/1999 - 12/2002 - Class G (W461/W463) 2001 - 2007 - Class SL (R230) 08/2001 - 02/2006 - SLR (C199) 2003 - 12/2009 -Sprinter 2 (W906) 04/2006 - 05/2018 In the case of the Sprinter, connect the vehicle plugs with ours before purchasing Compare the figure. The 10-pin ISO connector may not be present or have a Quadlock connector installed - Vito/Viano 2 (W639/V639) 04/2006 - 05/2014 In the case of the Vito and Viano, compare the plugs in the vehicle before purchasing to our illustration.

Not be present or have a Quadlock connector installed. The adapter provides the following signals.

Ignition + duration + Dimension - Steering wheel lighting dimmer line speaker signals speed signal reverse signal. You can reach us at the following times: Tuesday - Friday 10:00 - 18:00 Saturday 10am - 2pm. Factory amplifiers have it via fiber optic cables not supported and there is no audio output to the car speakers. In this case, you need an additional 2. Only for vehicles with interior CAN bus and with 10-pin ISO connector in the upper row of the ISO slot (for SL R230 with Command only if the plugs fit, which is usually only the case for foreign re-imports) you must use the ISO connector in the vehicle with a small In the case of the Sprinter, connect the vehicle plugs with ours before purchasing Compare the figure.

The 10-pin ISO connector may not In the case of.