Mercedes Vito Viano

Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014


Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014
Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014

Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014   Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014

This product sheet has been automatically translated. If you have any questions, please do not hesitate to contact us. Heating regulator by servo motor. The quality of our items is very strictly controlled.

Large selection of automotive parts in our shop. Attention: Important information regarding the installation of a turbocharger. To avoid installation errors, APM recommends having the goods installed only by a specialized workshop.

Make sure that the cause of malfunction and damage to the old turbocharger has been eliminated. Before starting the installation, the following parts around the turbocharger must be checked for dirt and leaks.

Outlet and feed lines on the turbocharger. Possibly a soot particle filter.

Engine oil, oil filter, and air filter should be replaced when changing the turbocharger. The turbocharger must be completely filled with clean engine oil before attaching the oil feed line through the oil inlet hole. The oil lines leading to the turbocharger as well as all flange and connection seals must also be replaced. For some brands, the intercooler must also be replaced according to the installation instructions.

Liquid sealants should never be used. After commissioning, check the tightness of all air, gas, and fuel lines. The air intake and exhaust system as well as the intercooler must be cleaned. Ensure that the system is free of chips, dirt, corrosion, oil, and other foreign bodies or substances. After installing the turbocharger, start the engine. Then let the engine idle for 30 seconds before loading it. Please note that warranty and/or liability claims against APM Autoteile GmbH cannot be considered if turbochargers are installed without following the above installation instructions and this alone causes damage. Logistics fees apply for cross-border shipments (delivery address outside of Germany). Please note the actual logistics costs incurred. La Palma, La Gomera, El Hierro, Tenerife, Gran Canaria, Fuerteventura, Lanzarote. Martinique, New Caledonia, French Guiana, Saint Pierre and Miquelon, Mayotte, Wallis and Futuna, Reunion.

& Engine oil, oil filter, and air filter should be replaced when changing the turbocharger. & The oil lines leading to the turbocharger as well as all flange and connection seals must also be replaced.

Please note that warranty and/or liability claims against APM Autoteile GmbH cannot be considered if turbochargers are installed. Exhaust charger, turbocharger replacement, gasket set, sealing kit. Boost, turbo, turbocharger, repair kit.

Manifold gasket, exhaust manifold gasket, engine charging, series. Exhaust system, turbine, drive wheel, compressor wheel, turbine wheel. Turbo compressor, turbo compressor, turbo, charger, exhaust turbo. Viano, Vito Bus, Vito/Mixto Van. Installation kit, installation set, installation parts, mounting kit, kit.

Exhaust turbocharger, turbocharger set, turbocharger kit, installation kit.


Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014   Turbo for Mercedes-Benz Viano Vito Mixto Bus W639 2.2 CDI Year 2003-2014